High Efficiency Floor Heat Boilers
KNIGHT Features
10 Models - The Right Choice, for Every Application
Advanced Negative Regulation Technology
KNIGHT safely and reliably operates with supply gas pressure as low as 4 inches water column, because "Neg/Reg" technology automatically adjusts fan speed to ensure the correct volume of fuel and air entering the burner.
- Up to 99% Efficiency
- 10 Models Available
- Advanced Negative Regulation Technology
- Fail-Safe Direct-Spark Ignition
- Two-in-One Stainless Steel Heat Exchanger
- Fully Modulating Burner with 5:1 Turndown
- Ease of Installation - Direct Venting up to 100 feet with 5-flexible options
Fail-Safe Direct-Spark Ignition
With each call for heat, two electrodes ignite the fuel/gas mixture. A third electrode then senses for flame. If no flame is detected, the system resets and attempts ignition four times. SMART SYSTEM will lock out and display the fault if ignition does not occur after four attempts.
Two-in-One Stainless Steel Heat Exchanger
A primary heat exchanger combined with a secondary heat exchanger capturing flue gas heat allows entering water temperatures as low as 50°F without a low-temperature bypass. The stainless steel, pH-tolerant design features a weld-sealed assembly with no O-rings or gaskets and does not require special glycol. ASME Section IV approved and stamped.
Fully Modulating Burner with 5:1 Turndown
The SMART SYSTEM allows fully modulating combustion with 5:1 turndown. The burner can fire as low as 20% of maximum input, and modulates the firing rate up to 100% as demand increases. The woven stainless steel mesh assembly fires in a 360° pattern along the entire length of the heat exchanger. These together allow KNIGHT's compact size to excel compared to units with larger multiple burners.
Ease of Installation
Direct Venting up to 100 Feet!
KNIGHT offers greater flexibility than other boilers for placement of units within the building, because it permits direct-vent air intake and exhaust runs up to 100 equivalent feet, using 3" PVC or CPVC pipe. Wall-mounted KNIGHT models also permit intake and vent runs up to 40 feet using 2" pipe. Intake and exhaust runs can terminate horizontally through a sidewall or vertically through the roof.
Control Features
- 2-Line, 16-Character LCD Display
- Displays setup and diagnostic
- Password Security
- Product Service Indicator
- Pump Relay w/Freeze Protection
- Low-Water Flow Indicator
- Outdoor Reset
- Night Setback
- Building Management System (BMS) Control
- DHWP with Pump Control
- System & Boiler Pump Controls
- In/Out Temp. Sensors and Display
- Field Connection Versatility
- Built-in Cascading Sequencer
- Standard Features
- 93% AFUE Efficiency (KBN080-285) (WBN050-210)
- 93.3% Thermal Efficiency (KBN399-500)
- ENERGY STAR® Qualified
- Modulating Burner with 5:1 Turndown
- ASME Stainless Steel Heat Exchanger
- Gasketless Heat Exchanger Design
- 30 psi Relief Valve (KBN080-285) (WBN050-210)
- 50 psi Relief Valve (KBN399-500)
- SMART SYSTEMT Operating Control, with:
- Digital Operating Control
- 2-Line, 16-Character LCD Display
- Password Security
- Outdoor Reset
- Built-in Sequencing for 2-8 Boilers
- 0 - 10 Vdc Input Control
- Product Service Indicator
- Time Clock
- PC Connection Port
- Inlet & Outlet Temperature Sensors
- Easy-Access Terminal Strip
- Low-Water Flow Indication
- Automatic Reset High Limit
- Contacts on Any Failure
- 3-Pump Control (Boiler, System and DHWP)
- Pump Relay with Freeze Protection
- Boiler Circulating Pump (KBN080-285) (WBN050-210)
- Direct-Spark Ignition
- Low-NOx Operation
- Natural to LP Gas Conversion Kit
- Direct-Vent Sealed Combustion
- PVC Venting up to 100 Feet
- Sidewall Vent Terminals
- Zero Clearance to Combustibles
- Adjustable Leveling Legs (KBN Models only)
- Wall Mount Bracket (WBN Models only)
- 12-Year Limited Warranty (See Warranty for Details)
Contact us or a distributor to see how we can help you be more profitable in your car wash business. CLICK HERE to find a Carwash Boilers, Inc. distributor in your region.
- Carwash Boilers Inc.
- 632 Sovereign Lane Medina, OH 44256
- 330.623.0036
- Fax 206.203.2829



